|
|
Post by furyagain on May 27, 2005 11:01:30 GMT -5
|
|
|
|
Post by MatrixXRS on May 28, 2005 9:35:53 GMT -5
If you like that then go for it  . Here's another option...Gold-Line Springs 1.75" all around drop www.goldlineonline.com/ |
|
|
|
Post by furyagain on May 31, 2005 0:17:00 GMT -5
|
|
|
|
Post by MatrixXRS on May 31, 2005 1:22:36 GMT -5
|
|
|
|
Post by furyagain on Jun 19, 2005 15:15:03 GMT -5
OK GREAT THE Springs are here planning to have them install on monday...
still thinking... should i .... should i not>
|
|
|
|
Post by DJDoubleLP on Jun 19, 2005 19:06:30 GMT -5
Well if you have them......you might as well!!!!! |
|
|
|
Post by furyagain on Jun 20, 2005 20:59:02 GMT -5
errr installed...
i don't like them>>>> too low....
especially at the speed bump ( it hit!)
errr i am going to put back the stock spring tomorrow..
DAMN it.... too low... too low...( that spring dropped like 2.5inch-3 inch>>
|
|
|
|
Post by AKLGT on Jun 20, 2005 21:38:43 GMT -5
don't go with such a high drop. get the trd springs, it's only 1.5" i believe. that's what i had on mine. of course, i still got stuck in the snow.. but you have awd and you'll be fine i'm sure.  |
|
|
|
Post by furyagain on Jun 20, 2005 21:57:41 GMT -5
mm will the Trd spring works with the AWD matrix?
|
|
|
|
Post by furyagain on Jun 20, 2005 22:02:36 GMT -5
err whatever... i think i should give up trying to low my matrix....
will go put back the stock spring tomorrow....
at the dealer
|
|
|
|
Post by DJDoubleLP on Jun 21, 2005 10:04:37 GMT -5
If it was not such a big drop I would take the springs off of your hands.....but 2 1/2" is WAY too much drop for me.
|
|
|
|
Post by AKLGT on Jun 24, 2005 21:00:38 GMT -5
don't have a clue if the trd springs fit the awd. sorry. let us know what happens. and yes, 2.5" drop is way too much in your neck of the woods!
|
|
.
).
