jaloos
Full Member
2006 Matrix (base)
Posts: 104
|
Post by jaloos on Aug 19, 2007 10:45:59 GMT -5
|
|
jaloos
Full Member
2006 Matrix (base)
Posts: 104
|
Post by jaloos on Aug 19, 2007 10:46:36 GMT -5
Took a while but finally nailed down the PS2 setup. Below is the pic of the setup in fleece and resin. PS2 in the middle and a controller on each side.  Slow progress but its getting there.  |
|
|
|
|
|
Post by AKLGT on Aug 19, 2007 13:05:52 GMT -5
holy smokes! there goes all your cargo space! LOL
|
|
jaloos
Full Member
2006 Matrix (base)
Posts: 104
|
Post by jaloos on Aug 19, 2007 19:51:28 GMT -5
Bought an old beater pickup for that. Besides the kids are older and pretty much gone so there is always the back seat for quick trips.
|
|
jaloos
Full Member
2006 Matrix (base)
Posts: 104
|
Post by jaloos on Aug 19, 2007 19:52:18 GMT -5
The PS2 rack is done, not without drama though. Once again not knowing what I am doing lol. Figured out the shape was far too complex to get vinyl to streatch over it, after it was half on lol. After pulling it off and sanding the glue off I decided to go with felt. It was about the only thing I could think of that would hold the shape I needed.   Looks ok I think?  |
|
|
|
Post by AKLGT on Aug 19, 2007 23:29:44 GMT -5
wow. i'm impressed! i don't think i could do such a big project like that! it's looking great!!!
|
|
|
|
Post by DJDoubleLP on Aug 20, 2007 18:31:06 GMT -5
Looking good Jaloos!! Are you going to be fibreglassing the complete sub box? Reason I am asking is because the plywood will flex too much with the subs compared to MDF or the plywood with the fibreglass surrounding it to re-enforce it.
|
|
jaloos
Full Member
2006 Matrix (base)
Posts: 104
|
Post by jaloos on Aug 26, 2007 9:05:08 GMT -5
The main sub enclosure is MDF, the plywood is for amps ect.
|
|
jaloos
Full Member
2006 Matrix (base)
Posts: 104
|
Post by jaloos on Aug 26, 2007 9:05:28 GMT -5
|
|
|
|
Post by AKLGT on Aug 26, 2007 15:21:42 GMT -5
wow. i am very impressed! can't wait to see it all finished!
|
|
jaloos
Full Member
2006 Matrix (base)
Posts: 104
|
Post by jaloos on Aug 30, 2007 0:03:57 GMT -5
|
|
|
|
Post by AKLGT on Aug 30, 2007 19:05:04 GMT -5
ok, so how you powering that screen and everything else??
|
|
jaloos
Full Member
2006 Matrix (base)
Posts: 104
|
Post by jaloos on Aug 30, 2007 19:52:10 GMT -5
ok, so how you powering that screen and everything else?? The tv and playstation are run off an inverter that is connected to a relay that is triggered by the amp remote on from the headunit. |
|
|
|
Post by AKLGT on Aug 31, 2007 17:01:44 GMT -5
and it's enough power to support that??
|
|
